China High Quality Processing Aid For Polyethylene Factories – DY-3020-01 Injection Grade PVDF – DONGTAI
China High Quality Processing Aid For Polyethylene Factories – DY-3020-01 Injection Grade PVDF – DONGTAI Detail:
Typital Properties
NO. |
NAME OF INDEX |
UNIT |
INDEX |
1 |
Appearance |
- |
White Powder |
2 |
Relative Density |
g/cm3 |
1.77-1.79 |
3 |
Melting Point |
℃ |
165-175 |
4 |
Melting flow index |
g/10min |
20-50(5kg) |
5 |
Tensile Strength |
MPa(23℃,≧) |
25 |
6 |
Percentage of breaking elongation |
%(23℃,≧) |
20 |
7 |
Shore hardness type D |
≧ |
70 |
8 |
Moisture Content |
% |
≤0.1 |
9 |
Thermal Decomposition Temperature |
℃ |
382-393 |
The index standard refers to T / FSI 027-2019, and the index data is only for customers’ reference.
Storage and Attention
The products mainly have three packaging forms: two-layer polyethylene plastic bag packaging, carton packaging and ton bag packaging for customers to choose. Daily storage in a clean and dry warehouse to prevent the introduction of impurities. This product is non-toxic and harmless at room temperature, but it should be noted that the processing temperature should not exceed 350 ℃, so as to prevent toxic gas from decomposition.
Product detail pictures:
Related Product Guide:
With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for China High Quality Processing Aid For Polyethylene Factories – DY-3020-01 Injection Grade PVDF – DONGTAI , The product will supply to all over the world, such as: Malaysia, Macedonia, Costa Rica, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
By Rigoberto Boler from Ireland - 2018.04.25 16:46
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Alma from Malaysia - 2017.12.31 14:53