China China High Quality Plastic Processing Additives Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI Manufacturer and Supplier

China High Quality Plastic Processing Additives Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for PFA For Cable Insulation Layer, Titanium Dioxide 3328, Plastic Raw Material, For even more inquires remember to do not hesitate to get in touch with us. Thank you - Your support continuously inspires us.

China High Quality Plastic Processing Additives Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI Detail:

Typital Properties

NO.	NAME OF INDEX	Test method	UNIT	JSL-21
1	Appearance	Visual Observation	-	White powder,No visible impurity
2	Solubility	Visual Observation	-	Clear and transparent, no impurity
3	Particle Size	ISO 22412	um	≤110(D50)
4	Relative Density	GB/T 1033.1	g/cm³	1.75-1.77
5	Moisture Content	HG/T2902	Wt%	≤0.10
6	Rotary Viscosity	10.28gPVDF/100mlNMP,30℃	mPa.s	5000~10000
7	Melting Point	GB/T 19466.3	℃	160-170
8	Thermal Decomposition Temperature	TGA	℃	≥370
9	Weight-average Molecular Weight	GPC，DMF		800000~1100000
10	Molecular Weight Distribution	GPC，DMF		3.0~4.0

The index standard refers to T / FSI 027-2019, and the index data is only for customers’ reference.

Instructions

Addition suggestions: Ternary systems （NCM523、NCM622、NCM811、NCA811）：1.2-1.8%；

LEP systems : 2.2-2.8%；LMO systems：1.3-1.7%；LCO systems：1.0-1.2%

(The amount of addition is adjusted according to the density and specific surface area of the positive electrode material.)

How to use: Stir at a high speed for 1-1.5 hours when the wet glue is used, then enter the pulping process after the PVDF is completely dissolved. Due to the large molecular weight of PVDF resin and slow dissolution rate, the stirring time can be increased. PVDF is added to the stirring tank in batches and the stirring temperature is increased to improve the dissolution rate.

Storage and Attention

PVDF Packaged in a two-layer polyethylene plastic bag. Products should be stored in clean, dry warehouses to prevent the introduction of impurities. This product is non-toxic and harmless at room temperature, but it should be noted that the processing temperature should not exceed 350 ℃, so as to prevent toxic gas from decomposition.

Product detail pictures:

Related Product Guide:

We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for China High Quality Plastic Processing Additives Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI , The product will supply to all over the world, such as: Anguilla, Plymouth, Berlin, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We're doing everything to supply our customers with best services and best solutions . We promise that we are going to be responsible all the way to the end once our services begin.

Anti Adhesion PFA